[−][src]Struct iced::widget::canvas::Path

pub struct Path { /* fields omitted */ }

This is supported on feature="canvas" or feature="glow_canvas" only.

An immutable set of points that may or may not be connected.

A single Path can represent different kinds of 2D shapes!

Implementations

`impl Path`[src]

`pub fn new(f: impl FnOnce(&mut Builder)) -> Path`[src]

This is supported on feature="canvas" or feature="glow_canvas" only.

Creates a new Path with the provided closure.

Use the Builder to configure your Path.

`pub fn line(from: Point, to: Point) -> Path`[src]

This is supported on feature="canvas" or feature="glow_canvas" only.

Creates a new Path representing a line segment given its starting and end points.

`pub fn rectangle(top_left: Point, size: Size<f32>) -> Path`[src]

This is supported on feature="canvas" or feature="glow_canvas" only.

Creates a new Path representing a rectangle given its top-left corner coordinate and its Size.

`pub fn circle(center: Point, radius: f32) -> Path`[src]

This is supported on feature="canvas" or feature="glow_canvas" only.

Creates a new Path representing a circle given its center coordinate and its radius.

Trait Implementations

`impl Clone for Path`[src]

`fn clone(&self) -> Path`[src]

`fn clone_from(&mut self, source: &Self)`1.0.0[src]

`impl Debug for Path`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>`[src]

Auto Trait Implementations

`impl RefUnwindSafe for Path`

`impl Send for Path`

`impl Sync for Path`

`impl Unpin for Path`

`impl UnwindSafe for Path`

Blanket Implementations

`impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where D: AdaptFrom<S, Swp, Dwp, T>, Dwp: WhitePoint, Swp: WhitePoint, T: Component + Float,` [src]

`fn adapt_into_using<M>(self, method: M) -> D where M: TransformMatrix<Swp, Dwp, T>,` [src]

`fn adapt_into(self) -> D`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T, U> ConvertInto for T where U: ConvertFrom<T>,` [src]

`fn convert_into(self) -> U`[src]

`fn convert_unclamped_into(self) -> U`[src]

`fn try_convert_into(self) -> Result<U, OutOfBounds>`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> SetParameter for T`

`fn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where T: Parameter<Self>,`

`impl<T> ToOwned for T where T: Clone,` [src]

`type Owned = T`

The resulting type after obtaining ownership.

`fn to_owned(&self) -> T`[src]

`fn clone_into(&self, target: &mut T)`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = >::Error`

The type returned in the event of a conversion error.

[−][src]Struct iced::widget::canvas::Path

Implementations

impl Path[src]

pub fn new(f: impl FnOnce(&mut Builder)) -> Path[src]

pub fn line(from: Point, to: Point) -> Path[src]

pub fn rectangle(top_left: Point, size: Size<f32>) -> Path[src]

pub fn circle(center: Point, radius: f32) -> Path[src]

Trait Implementations

impl Clone for Path[src]

fn clone(&self) -> Path[src]

fn clone_from(&mut self, source: &Self)1.0.0[src]

impl Debug for Path[src]

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>[src]

Auto Trait Implementations

impl RefUnwindSafe for Path

impl Send for Path

impl Sync for Path

impl Unpin for Path

impl UnwindSafe for Path

Blanket Implementations

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where D: AdaptFrom<S, Swp, Dwp, T>, Dwp: WhitePoint, Swp: WhitePoint, T: Component + Float, [src]

fn adapt_into_using<M>(self, method: M) -> D where M: TransformMatrix<Swp, Dwp, T>, [src]

fn adapt_into(self) -> D[src]

impl<T> Any for T where T: 'static + ?Sized, [src]

fn type_id(&self) -> TypeId[src]

impl<T> Borrow<T> for T where T: ?Sized, [src]

fn borrow(&self) -> &T[src]

impl<T> BorrowMut<T> for T where T: ?Sized, [src]

fn borrow_mut(&mut self) -> &mut T[src]

impl<T, U> ConvertInto<U> for T where U: ConvertFrom<T>, [src]

fn convert_into(self) -> U[src]

fn convert_unclamped_into(self) -> U[src]

fn try_convert_into(self) -> Result<U, OutOfBounds<U>>[src]

impl<T> From<T> for T[src]

fn from(t: T) -> T[src]

impl<T, U> Into<U> for T where U: From<T>, [src]

fn into(self) -> U[src]

impl<T> SetParameter for T

fn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where T: Parameter<Self>,

impl<T> ToOwned for T where T: Clone, [src]

type Owned = T

fn to_owned(&self) -> T[src]

fn clone_into(&self, target: &mut T)[src]

impl<T, U> TryFrom<U> for T where U: Into<T>, [src]

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

impl<T, U> TryInto<U> for T where U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

impl<V, T> VZip<V> for T where V: MultiLane<T>,

fn vzip(self) -> V

`impl Path`[src]

`pub fn new(f: impl FnOnce(&mut Builder)) -> Path`[src]

`pub fn line(from: Point, to: Point) -> Path`[src]

`pub fn rectangle(top_left: Point, size: Size<f32>) -> Path`[src]

`pub fn circle(center: Point, radius: f32) -> Path`[src]

`impl Clone for Path`[src]

`fn clone(&self) -> Path`[src]

`fn clone_from(&mut self, source: &Self)`1.0.0[src]

`impl Debug for Path`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>`[src]

`impl RefUnwindSafe for Path`

`impl Send for Path`

`impl Sync for Path`

`impl Unpin for Path`

`impl UnwindSafe for Path`

`impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S where D: AdaptFrom<S, Swp, Dwp, T>, Dwp: WhitePoint, Swp: WhitePoint, T: Component + Float,` [src]

`fn adapt_into_using<M>(self, method: M) -> D where M: TransformMatrix<Swp, Dwp, T>,` [src]

`fn adapt_into(self) -> D`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T, U> ConvertInto<U> for T where U: ConvertFrom<T>,` [src]

`fn convert_into(self) -> U`[src]

`fn convert_unclamped_into(self) -> U`[src]

`fn try_convert_into(self) -> Result<U, OutOfBounds<U>>`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> SetParameter for T`

`fn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where T: Parameter<Self>,`

`impl<T> ToOwned for T where T: Clone,` [src]

`type Owned = T`

`fn to_owned(&self) -> T`[src]

`fn clone_into(&self, target: &mut T)`[src]

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<V, T> VZip<V> for T where V: MultiLane<T>,`

`fn vzip(self) -> V`